|
||||||
|
Point a browser to your new nslu2 IP (in my case 10.1.20.26) and set a new password. Set your time zone (with web interface is easier 😉 ) Login into your nslu2 with ssh (user root, password whichever password you set previously) Disable Web interface (we don’t need it 😉 ): # /etc/init.d/webif disable […] Download latest version of openwrt binaries from http://www.slug-firmware.net/ (or http://downloads.openwrt.org/snapshots/ixp4xx/openwrt-ixp4xx-squashfs.img for development version) Install UpSlug2 (utility to upgrade the firmware of a LinkSys NSLU2 via the network), into Debian-based system, simply type “apt-get install upslug2” Put Nslu2 in upgrade mode (hold-on the reset switch, turn-on the nslu2, wait 10 seconds until “Ready/Status” led blink […] Adding a serial port to our nslu2 is very easy. You can solder a Male or a Female DB9 serial connector, remember, if you use a male connector (such a normal pc) you can plug any kind of serial device and you it as a console port (with a correct cable); if you […] Fon2200 SD/MMC reader I’m going to describe how to connect an MMC card (with an home-made reader) to new Fonera. This new model is tagged with FON2200 and have a new board design, different from the old one (FON2100). […] |
||||||
|
Copyright © 2024 Farlock.org - All Rights Reserved Powered by WordPress & Atahualpa |
||||||
